WAVE 41 FLOW WOOD PANEL

ABOUT

Designed for both flat and curved applications, Wave Flow brings refined texture and natural warmth to interior spaces through its soft profile face and engineered White Oak veneer.

Constructed with an MDF core and ply backing for improved stability, the panel is engineered to accommodate concave and convex surfaces while maintaining a refined, seamless appearance across the installation.

Wave 41 is supplied raw and ready for finishing, allowing the final appearance to be tailored through oils, stains, or clear coatings to suit the project palette and surrounding materiality.

Supported by a coordinated trim system including matching bullnose trim, square trim, edges, curves, and corner trims, allowing for a fully resolved, seamless finish across the entire installation.


SPECIFICATIONS

  • Profile: Wave 41 Flow  [  OAK ]
  • Material Composition:  Raw Engineered White Oak veneer, with MDF core and ply backing. The reverse side is factory-sealed in a clear coating to improve panel balance and stability. 
  • Application: Suitable for flat, concave, and convex interior surfaces.
  • Curving Capability: Recommended minimum radius 150mm (diameter 300mm)
  • Finish: Raw veneer, ready for oiling, staining, tinting, or clear coating.
  • Coverage: 133.5mm installed face coverage × 2730mm panel length.
  • Veneer Note: Crafted with an engineered White Oak veneer to deliver a consistent colour and grain across every panel.
  • Trim allowance: Allow approximately 10mm trimming from each panel end during installation.
  • Fire Performance: Suitable for achieving Group 1-S fire performance when used in conjunction with an approved intumescent coating system. Contact us for technical documentation and project-specific recommendations.


ACCESSORIES

Compatible with matching

For exposed edges and finishing details, veneer edge banding and solid timber trims are available to help achieve a refined, cohesive installation outcome.

Installation: For installation guidance, adhesive recommendations, fixing methods, and curved installation techniques, please refer to the installation guide.

Download: Installation Guide


TIMBER & FINISH NOTES

We recommend ordering samples prior to purchase to best understand the tone, texture, and natural variation of the material within your space.

Unless otherwise specified, veneer and solid timber panels are supplied raw and ready for finishing. Project imagery shown throughout our website may feature panels that have been coated, oiled, stained, or tinted after installation, which can influence the final appearance of the timber.


DELIVERY

Please note that exceptions may apply for orders of significant size or where site access is restricted. In these cases, additional freight costs may be incurred, including the potential requirement for a hiab or other specialised delivery services. 

Clear, flat access required for delivery: 7.7m (L), 3.3m (H), 2.5m (W)
An additional delivery fee may apply if access is restricted

SKU COVERAGE (W x H) THICKNESS (MM) RRP EX-GST
PANEL - W41FO2730 133.5 x 2730mm 21mm $77.39
EDGES - W41FO2730EDGE
*Set of 2		 41 & 44.5 x 2730mm 21mm $77.39
CURVE- W41FO2730CURVE 44.5 x 2730mm 21mm $34.78
BULLNOSE TRIM - BNO2730 28 x 19 x 2730mm 29mm $39.13
SQUARE TRIM - SQO2730 60 x 22 x 2730mm 22mm $47.83

*Prices in the table above are GST-exclusive 

NOT SURE WHAT YOU NEED?


Send through your project details, preferred profile, and we’ll help guide you through the process with a tailored quote and practical advice

CONTACT US