TRUETECH BATTEN 30 WOOD PANEL

ABOUT

Designed for both flat and curved applications, Batten 30 brings sculptural depth and natural warmth to interior spaces. Engineered and finished with intention, TrueTech Batten 30 combines the beauty of real timber with the control and consistency of modern manufacturing. Its technical oak veneer offers a refined, natural finish with uniform grain and colour throughout, making it the ideal choice when a consistent veneer is essential.

The raw engineered oak face is ready for a stain or clear coating, allowing you to customise the tone to suit your project.

This panel conforms comfortably to a 250 mm radius (500 mm diameter), delivering seamless results across both flat and curved surfaces.

Designed with a hidden tongue-and-groove profile, panels connect cleanly for a flawless installation, ensuring visual continuity across every join.

Supported by a coordinated trim system, including matching edges, bullnose trim, square trim and curves, allowing for a fully resolved, seamless finish across the entire installation.

SPECIFICATIONS

  • Profile: Batten 30  [  OAK  ]
  • Panel dimensions: 150mm (W) x 2780mm (L)
  • Coverage: 145mm installed face coverage × 2780mm panel length.
  • Dimensional tolerances: All dimensions are nominal and subject to manufacturing and material tolerances of ±1mm.
  • Application: Suitable for flat, concave, and convex interior surfaces.
  • Material Composition: Raw reconstituted timber veneer with a White Oak appearance, pine core, and factory-sealed backing. The reverse face is sealed to improve panel balance and dimensional stability.
  • Curving Capability: Minimum convex radius: 150mm - Minimum concave radius: 200mm using the dedicated "curve" panel. 
  • Timber Veneer: Engineered for consistency in grain and colour, with minimal visual variation between panels.
  • Trim allowance: Allow approximately 10mm trimming from each panel end during installation.
  • Fire Performance: Batten 30 can achieve Group 1-S fire performance when coated with an approved intumescent coating system and applied in accordance with the coating manufacturer's specifications. Contact us for technical documentation and project-specific guidance.
  • Installation: Suitable for flat or curved substrates.
  • Important for precision projects: For projects requiring precise alignment, particularly around door openings or detailed joinery, we recommend requesting a sample from the current stock batch to verify dimensions before finalising measurements and fabrication.
  • Download: Specification Sheet


ACCESSORIES

Compatible with matching

    For exposed edges and finishing details, veneer edge banding and solid timber trims are available to help achieve a refined, cohesive installation outcome.

    Installation: For installation guidance, adhesive recommendations, fixing methods, and curved installation techniques, please refer to the installation guide.

    Download: Installation Guide

     

    TIMBER & FINISH NOTES

    We recommend ordering samples prior to purchase to understand the tone and texture of the material within your space.

    Batten 30 Flow features a reconstituted timber veneer engineered to achieve a highly consistent grain and colour appearance across panels and batches. While the manufacturing process significantly reduces natural variation compared with traditional veneers, minor differences in tone may still occur and should be regarded as a natural characteristic of timber products.

    Panels are supplied raw and ready for finishing. Project imagery throughout our website may feature panels that have been oiled, stained, tinted, or clear-coated after installation, which can significantly influence the final appearance of the material.

    Batten 30 is intended for interior applications only and is not suitable for exterior use or areas subject to prolonged moisture exposure.


    DELIVERY

    Please note that exceptions may apply for orders of significant size or where site access is restricted. In these cases, additional freight costs may be incurred, including the potential requirement for a hiab or other specialised delivery services. 

    Clear, flat access required for delivery: 7.7m (L), 3.3m (H), 2.5m (W)
    An additional delivery fee may apply if access is restricted

    SQM Rate from: $195.51

    SKU COVERAGE (W x H) THICKNESS (MM) RRP EX-GST
    B30OV152780 145 x 2780mm 18mm $77.39

    *Prices in the table above are GST-exclusive.

    NOT SURE WHAT YOU NEED?


    Send through your project details, preferred profile, and we’ll help guide you through the process with a tailored quote and practical advice