RIPPLE 60 FLOW WOOD PANEL
ABOUT
Designed for both flat and curved applications, Ripple 60 Flow brings sculptural depth and natural warmth to interior spaces through its softly scalloped profile and reconstituted timber veneer in a White Oak appearance.
Constructed with a stable MDF core and factory-sealed ply backing, Ripple 60 Flow is engineered to accommodate both concave and convex surfaces while maintaining a refined, seamless appearance across the installation.
Ripple 60 Flow is supplied raw and ready for finishing, allowing the final appearance to be tailored through oils, stains, or clear coatings to suit the project palette and surrounding materiality.
Supported by a coordinated trim system, including matching edges, bullnose trim, square trim, curves, and corner trims, allowing for a fully resolved, seamless finish across the entire installation.
SPECIFICATIONS
- Profile: Ripple 60 Flow [ OAK ]
- Material Composition: Raw reconstituted timber veneer with a White Oak appearance, MDF core, and factory-sealed ply backing. The reverse face is sealed to improve panel balance and dimensional stability.
- Application: Suitable for flat, concave, and convex interior surfaces.
- Finish: Raw veneer, ready for oiling, staining, tinting, or clear coating.
- Coverage: 134mm installed face coverage × 2730mm panel length.
- Curving Capability: Recommended minimum radius: 300mm (600mm diameter)
- Natural Variation: Engineered for consistency of grain and colour, with minimal visual variation between panels.
- Trim allowance: Allow approximately 10mm trimming from each panel end during installation.
- Fire Performance: Ripple 60 Flow can achieve Group 1-S fire performance when coated with an approved intumescent coating system and applied in accordance with the coating manufacturer's specifications. Contact us for technical documentation and project-specific guidance.
ACCESSORIES
Compatible with matching
- Bullnose trims
- Square trims
- Edge components
- Curve components
For exposed edges and finishing details, matching veneer edge banding and solid timber trims are available to help achieve a refined, cohesive installation outcome.
Installation: For installation guidance, adhesive recommendations, fixing methods, and curved installation techniques, please refer to the installation guide.
Download: Installation Guide
TIMBER & FINISH NOTES
We recommend ordering samples prior to purchase to understand the tone and texture of the material within your space.
Ripple 60 Flow features a reconstituted timber veneer engineered to achieve a highly consistent grain and colour appearance across panels and batches. While the manufacturing process significantly reduces natural variation compared with traditional veneers, minor differences in tone may still occur and should be regarded as a natural characteristic of timber products.
Panels are supplied raw and ready for finishing. Project imagery throughout our website may feature panels that have been oiled, stained, tinted, or clear-coated after installation, which can significantly influence the final appearance of the material.
Ripple 60 Flow is intended for interior applications only and is not suitable for exterior use or areas subject to prolonged moisture exposure.
DELIVERY
Please note that exceptions may apply for orders of significant size or where site access is restricted. In these cases, additional freight costs may be incurred, including the potential requirement for a hiab or other specialised delivery services.
Clear, flat access required for delivery: 7.7m (L), 3.3m (H), 2.5m (W)
An additional delivery fee may apply if access is restricted
| SKU | COVERAGE (W x H) | THICKNESS (MM) | RRP EX-GST |
| PANEL - R60FO2730 | 134 x 2730mm | 21mm | $77.39 |
|
EDGES - R60FO2730EDGE *Set of 2 |
67 x 2730mm | 21mm | $77.39 |
| CURVE - R60FO2730CURVE | 67 x 2730mm | 21mm | $42.61 |
| BULLNOSE TRIM - BNO2730 | 29 x 19 x 2730mm | 29mm | $39.13 |
| SQUARE TRIM - SQO2730 | 60 x 22 x 2730mm | 22mm | $47.83 |
*Prices in the table above are GST-exclusive
NOT SURE WHAT YOU NEED?
Send through your project details, preferred profile, and we’ll help guide you through the process with a tailored quote and practical advice